Filter
Top Products
10
3. Press the NORMAL push button, the
correspondent indicator light keeps flashing while
the indicator light of the INTENSIVE SID 80 push
button turns off.
At the same time the indicator light "end of
programme" starts to flash.
4. Press the NORMAL push button again, the "end
of programme" indicator light turns off, this means
that the rinse aid indicator light has been
deactivated.
5. To memorise the operation, switch off the
dishwasher by pressing the ON-OFF push button.
To reactivate the rinse aid indicator light follow the
same process until the "end of programme" indicator
light starts to flash.
Adjusting the dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6 position
selector (C) (position 1 minimum dosage, position 6
maximum dosage).
Increase the dose if there are drops of water or lime
spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the
dishes.
BR02
C
m
a
x
6
5
4
3
2
1
SO392