Filter
Top Products
4 BURNERS GAS RANGES - TOWN GAS
N 900
BACA5 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
WATER COLUMN WITH SWIVEL ARM 206288 206288
WATER COLUMN EXTENSION FOR 900 LINE 206290 206290
SUPPORT FOR "BRIDGE" SYSTEM 800 MM 206137 206137
SUPPORT FOR "BRIDGE" SYSTEM 400 MM 206154 206154
SUPPORT FOR "BRIDGE" SYSTEM 1600 MM 206141 206141
SUPPORT FOR "BRIDGE" SYSTEM 1400 MM 206140 206140
SUPPORT FOR "BRIDGE" SYSTEM 1200 MM 206139 206139
SUPPORT FOR "BRIDGE" SYSTEM 1000 MM 206138 206138
SINGLE BURNER(6KW)RADIANT PLATE-900 LINE 206170 206170
SINGLE BURNER SMOOTH PLATE 206171 206171
SINGLE BURNER RIBBED PLATE 206172 206172
SIDE HANDRAIL-RIGHT/LEFT HAND 206165 206165
S/S GRID FOR DOUBLE BURNER-900 LINE 206298 206298
REAR FLUE UPSTAND FOR SMALL CHIMNEY 206159 206159
PRESSURE REGULATOR FOR GAS UNITS 927225 927225
PAIR OF COVERING STRIPS FOR END ELEMENTS 206234 206234
PAIR OF CAST IRON GRIDS 206208
LARGE HANDRAIL(PORTIONING SHELF)800 MM 206186 206186
LARGE HANDRAIL(PORTIONING SHELF)400 MM 206185 206185
JUNCTION SEALING KIT 206086 206086
FRONTAL KICKING STRIP 800 MM 206176 206176
FRONTAL KICKING STRIP 400 MM 206175 206175
FRONTAL KICKING STRIP 200 MM 206174 206174
FRONTAL KICKING STRIP 1600 MM 206179 206179
FRONTAL KICKING STRIP 1200 MM 206178 206178
FRONTAL KICKING STRIP 1000 MM 206177 206177
FRONTAL HANDRAIL 800 MM 206167 206167
FRONTAL HANDRAIL 400 MM 206166 206166
FRONTAL HANDRAIL 1600 MM 206192 206192
FRONTAL HANDRAIL 1200 MM 206191 206191
FRONT.KICK.STRIP F.CONCRETE INST.800 MM 206148 206148
FRONT.KICK.STRIP F.CONCRETE INST.400 MM 206147 206147
FRONT.KICK.STRIP F.CONCRETE INST.200 MM 206146 206146
FRONT.KICK.STRIP F.CONCRETE INST.1600 MM 206152 206152
FRONT.KICK.STRIP F.CONCRETE INST.1200 MM 206151 206151
FRONT.KICK.STRIP F.CONCRETE INST.1000 MM 206150 206150
FLUE CONDENSER FOR 1/2 MOD. DIAM.120MM 206155 206155
DRAUGHT DIVERTER WITH 120 MM DIAMETER 206126 206126
CHIMNEY UPSTAND 800MM 206304 206304
4 WHEELS (2 WITH BRAKE) 206188 206188
4 FEET FOR CONCRETE INSTALLATION 206210 206210
2/1 GN CHROME GRID 164250 164250
2 SIDE KICKING STRIPS F.CONCRETE INSTAL. 206157 206157
2 SIDE KICKING STRIPS 206180 206180
2 SIDE COVERING PANELS H=700 D=900 206134 206134
2 SIDE COVERING PANELS FOR TOP-D=900MM 206278 206278
2 PANELS FOR SERVICE DUCT (SINGLE INST.) 206181 206181
2 PANELS FOR SERVICE DUCT (BACK TO BACK) 206202 206202
2 CAST IRON PLATE BARS FOR EL.COOK.TOP 206056
NCFG800T
200116
NCFGE800T
200144
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
� Worktop in 20/10 stainless steel.
Front and side panels in stainless
steel with Scotch Brite finish.
� All models have right-angled side
edges to allow flush-fitting joins
between units eliminating gaps and
possible dirt traps.
� Stainless steel oven chamber with
3 levels of runners to accommodate
2/1GN shelves.
� Ribbed, cast-iron oven base plate.
� Inside door panel in stainless steel
� Stainless steel feet adjustables up
to a height of 50 mm.
� Handles on the oven in stainless
steel.
� Grids in stainless steel are
washable in a dishwasher.
� Main connections can be via the
base of the unit.
� All models provided with service
duct to facilitate installation
� All gas appliances are supplied for
use with natural gas, with LPG
conversion jets supplied as standard.
� The special design of the control
knob system guarantees against
water infiltration.
� All models can be installed on
cantilever system.
� IPX5 water protection.