RACK TYPE DISHWASHERS
COMPACT RTCS 250
EBBD10 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
SPLASH HOOD-RIGHT SIDE-COMPACT RACK
TYPE
864247 864247 864247 864247
SPLASH HOOD-LEFT SIDE-COMPACT RACK
TYPE
864248 864248 864248 864248
KIT SILASTIC CURTAINS FOR RACK TYPE DW 864245 864245 864245 864245
KIT SANITIZ.(2 HEAT.EL)-SHORT CRT 250R/H 864167 864167 864167 864167
KIT AIR GAP FOR COMPACT RACK TYPE 864309 864309 864309 864309
KIT 9 BASKETS FOR 1-TANK RACK TYPE DW 867051 867051 867051 867051
KIT 6 BASKETS FOR 1-TANK RACK TYPE DW 867050 867050 867050 867050
EL.HOT AIR BLOWER-RIGHT-600MM-COMPACT
RT
864506 864506
EL.HOT AIR BLOWER-LEFT-600MM-COMPACT
RT
864507 864507
EL. DRYING TUNNEL-CORNER-R>L-COMPACT
RT
864520 864520
EL. DRYING TUNNEL-CORNER-L>R-COMPACT
RT
864521 864521
EL. DRYING TUNNEL-COMPACT RT-R>L-900 MM 864516 864516
EL. DRYING TUNNEL-COMPACT RT-R>L-600 MM 864518 864518
EL. DRYING TUNNEL-COMPACT RT-L>R-900 MM 864517 864517
EL. DRYING TUNNEL-COMPACT RT-L>R-600 MM 864519 864519
DRAIN KIT FOR MODULAR+COMPACT RACK
TYPE
864150 864150 864150 864150
BASKET FOR 5 HALF INSULATED TRAYS-RED 867005 867005 867005 867005
12 S/S PLUGS FOR
WASH.ARMS-MODUL/COMP.RT
864239 864239 864239 864239
RTCS250ERA
534324
RTCS250ELA
534325
RTCS250ERB
534326
RTCS250ELB
534327
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
� Pre-wash is separate from wash zone with
less than 35°C water without detergent for
maximum dirt removal and incorporates
automatic partial drain.
� In the wash zone all the soil is removed by
the combination of the mechanical washing
action by means of a powerful 450 litres /
minute self draining wash pump, the thermal
action of the heating elements that guarantee
a constant water temperature of between 55°
and 65°C and appropriate detergents. Wash
tank is pressed.
� Rinse zone: clean water is used to
eliminate any trace of detergent from the
wash-ware.
� As optional extra the RTCS250 can be
equipped with a drying zone for fast and
efficient drying.
� Tanks are pressed with completely
rounded corners and sloping base to facilitate
cleaning.
� Smooth surfaces.
� 304 AISI stainless steel front and side
panels, strainers and wash and rinse arms.
� Wash arms and double tank filter (flat and
deep box) easy to remove.
� Height adjustable stainless steel feet.
� All models finished in top quality materials
with double skinned construction to aid
durability and reduce noise.
� Self-draining wash pumps provide
maximum hygiene.
� Easy access to the energy saving
condenser unit.
� Large balanced inspection doors for easy
access to wash area.
� Self-cleaning cycle in pre-wash, wash &
rinse zones.
� Automatic start/stop function.
� Simple electric control panel.
� Counter balanced door with safety switch
and easy to grip handle.
� Built-in rinse water heater to increase the
temperature of the final rinse water.
� Electronic control panel with
autodiagnostic check control.
� 35mm thickness foam injection insulated
doors to reduce noise and reduce heat
dispersion.
� Available with version equipped with
Energy Saving Device (ESD) to pre-heat the
incoming cold water and to save up to 12kW
of energy. ESD incorporates a condenser
unit to decrease temperature and humidity of
the outlet hot steam.
� Separate pre-wash for lower detergent
and water consumption.
� 98% recyclable by weight.
� CFC free packaging.
� Low noise level.
� Developed and produced in ISO 9001 and
ISO 14001 certified factory.
* For models without ESD, the installation is
recommended below a dishwashing hood to
convey steam.