Zanussi RTCS 250 Dishwasher User Manual


 
RACK TYPE DISHWASHERS
COMPACT RTCS 250
EBBD10 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
SPLASH HOOD-RIGHT SIDE-COMPACT RACK
TYPE
864247 864247 864247 864247
SPLASH HOOD-LEFT SIDE-COMPACT RACK
TYPE
864248 864248 864248 864248
KIT SILASTIC CURTAINS FOR RACK TYPE DW 864245 864245 864245 864245
KIT SANITIZ.(2 HEAT.EL)-SHORT CRT 250R/H 864167 864167 864167 864167
KIT AIR GAP FOR COMPACT RACK TYPE 864309 864309 864309 864309
KIT 9 BASKETS FOR 1-TANK RACK TYPE DW 867051 867051 867051 867051
KIT 6 BASKETS FOR 1-TANK RACK TYPE DW 867050 867050 867050 867050
EL.HOT AIR BLOWER-RIGHT-600MM-COMPACT
RT
864506 864506
EL.HOT AIR BLOWER-LEFT-600MM-COMPACT
RT
864507 864507
EL. DRYING TUNNEL-CORNER-R>L-COMPACT
RT
864520 864520
EL. DRYING TUNNEL-CORNER-L>R-COMPACT
RT
864521 864521
EL. DRYING TUNNEL-COMPACT RT-R>L-900 MM 864516 864516
EL. DRYING TUNNEL-COMPACT RT-R>L-600 MM 864518 864518
EL. DRYING TUNNEL-COMPACT RT-L>R-900 MM 864517 864517
EL. DRYING TUNNEL-COMPACT RT-L>R-600 MM 864519 864519
DRAIN KIT FOR MODULAR+COMPACT RACK
TYPE
864150 864150 864150 864150
BASKET FOR 5 HALF INSULATED TRAYS-RED 867005 867005 867005 867005
12 S/S PLUGS FOR
WASH.ARMS-MODUL/COMP.RT
864239 864239 864239 864239
RTCS250ERA
534324
RTCS250ELA
534325
RTCS250ERB
534326
RTCS250ELB
534327
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
Pre-wash is separate from wash zone with
less than 35°C water without detergent for
maximum dirt removal and incorporates
automatic partial drain.
In the wash zone all the soil is removed by
the combination of the mechanical washing
action by means of a powerful 450 litres /
minute self draining wash pump, the thermal
action of the heating elements that guarantee
a constant water temperature of between 55°
and 65°C and appropriate detergents. Wash
tank is pressed.
Rinse zone: clean water is used to
eliminate any trace of detergent from the
wash-ware.
As optional extra the RTCS250 can be
equipped with a drying zone for fast and
efficient drying.
Tanks are pressed with completely
rounded corners and sloping base to facilitate
cleaning.
Smooth surfaces.
304 AISI stainless steel front and side
panels, strainers and wash and rinse arms.
Wash arms and double tank filter (flat and
deep box) easy to remove.
Height adjustable stainless steel feet.
All models finished in top quality materials
with double skinned construction to aid
durability and reduce noise.
Self-draining wash pumps provide
maximum hygiene.
Easy access to the energy saving
condenser unit.
Large balanced inspection doors for easy
access to wash area.
Self-cleaning cycle in pre-wash, wash &
rinse zones.
Automatic start/stop function.
Simple electric control panel.
Counter balanced door with safety switch
and easy to grip handle.
Built-in rinse water heater to increase the
temperature of the final rinse water.
Electronic control panel with
autodiagnostic check control.
35mm thickness foam injection insulated
doors to reduce noise and reduce heat
dispersion.
Available with version equipped with
Energy Saving Device (ESD) to pre-heat the
incoming cold water and to save up to 12kW
of energy. ESD incorporates a condenser
unit to decrease temperature and humidity of
the outlet hot steam.
Separate pre-wash for lower detergent
and water consumption.
98% recyclable by weight.
CFC free packaging.
Low noise level.
Developed and produced in ISO 9001 and
ISO 14001 certified factory.
* For models without ESD, the installation is
recommended below a dishwashing hood to
convey steam.