Filter
Top Products
4
DESCRIPTION OF THE APPLIANCE
A
B
C
D
E
F
G
H
I
L
M
A -Ice trays
B -Shelf for freezing fresh food
C -Frozen food storage
D -Dairy compartment
E -Can storage shelf
F - Bottle storage shelf
G -Salad drawer
H -Glass shelf
I - Drain channel
L - Storage shelves
M- Thermostat control for both compartments
17
Door reversal
1. Unplug the appliance from the power supply
before carrying out the following operations.
2. Remove the feet (3).
3. Unscrew the bottom hinge (1).
4. Remove the fridge door by releasing it from the
middle hinge (H).
5. Unscrew the middle hinge.
6. Remove the freezer door by releasing it from the
top hinge pin (G).
7. Remove the pin (G) from the top hinge, then
mount these on the opposite side.
8. Refit the freezer door, after having removed the
plugs(I) which must be refitted on the other side.
9. Replace the middle hinge to the left hand side.
10.Refit the fridge door and bottom hinge (1) on the
opposite side.
11.Refit the feet (3) on the opposite side.
12.The doors can be aligned by adjusting the middle
hinge.
13.The middle hinge can be adjusted horizontally,
with the help of a tool, after having slackened the
two screws.
Important
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a low setting.
H
G
I
I
I
D715 PIED/M
1
2
3