Filter
Top Products
20
Fix the appliance to the side of the kitchen unit, fit
the bracket (E)and (F), adjust the distance , and fix
using the screws (as in figure).Fit the cover (D).
After completion of the door reversing operation,
check that the door gasket adheres to the
cabinet. If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of
the gasket or accelerate this process by heating
up the part involved with a normal hairdryer on a
low setting.
F
PR167/1
Hd
Hb
Fix cover (Hd) on guide (Hb) until it clips into place.
PR168
Hb
Place the small square on the guide again and fix it
with the screws supplied.
Should the lining up of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.