Filter
Top Products
19
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet.If
the ambient temperature is cold (i.e.in Winter), the
gasket may not fit perfectly to the cabinet.In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a low setting.
D
E
D734
If the appliance is to be fitted laterally to the kitchen
unit, it will be sufficient to loosen the screws of the
little plates (D), move them as shown in Fig.and
then fasten them up again.Fit the cover (E).
PR168
Hb
Place the small square on the guide again and fix it
with the screws supplied.
Should the lining up of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.
PR167/1
Hd
Hb
Fix cover (Hd) on guide (Hb) until it clips into place.