Zanussi ZBD 902 Oven User Manual


 
4
AFTER USE
Ensure that all control knobs are in the OFF position
when not in use.
For hygiene and safety reasons, this oven should be
kept clean at all times. A build-up offats or other
foodstuffs could result in a fire, especially in the grill
pan.
Always allow the cooling fan to cool the oven down
before switching off at the electrical supply prior to
carrying out any cleaning or maintenance work.
Do not leave utensils containing foodstuffs, e.g. fat or
oil in or on the oven in case it is inadvertently switched
ON.
Ovens and hobs become very hot, and retain their
heat for a long period of time after use. Children
should be kept well away from the cooker until it has
cooled.
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Refer to your local Zanussi Service
Centre. Always insist on genuine Zanussi spare parts.
YOUR SAFETY IS OF PARAMOUNT
IMPORTANCE
Therefore, if you are unsure about any of the meanings
of these WARNINGS, or you require any further
information on the full range of ZANUSSI products,
contact the ZANUSSI Customer Care Department.
ZANUSSI Ltd.
Zanussi House
Hambridge Road
Newbury
Berkshire RG14 5EP
TELEPHONE: 01635 - 521313
WARNING
Please remember that an appliance used for
cooking does get hot, so make sure that children
are kept well away while it is in use.
* 73/23 - 90/683 (Low Voltage Directive);
* 93/68 (General Directives);
* 89/336 (Electromagnetical Compatibility Directive) .
and subsequent modifications
This appliance complies with the following E.E.C. Directives:
MANUFACTURER: ELECTROLUX ZANUSSI ELETTRODOMESTICI S.p.A.
Viale Bologna 298
47100 FORLÌ (Italy)