Zanussi ZCE 7701 Oven User Manual


 
13
Release the minute minder button and the display will
return to the time of day after 5 seconds.
During the operation of the minute minder, the
remaining time period can be shown in the display by
pressing the minute minder button ( ) as Fig. 5.
The minute minder will sound intermittently for up to
2 minutes and the bell symbol will flash at the end of
the timed period. The sound can be stopped by
pressing any of the 4 left-hand side buttons.
3. HOW TO SET THE OVEN TIMER
CONTROL
The automatic control can be used to control either
oven but you can only use the control for both ovens
at the same time if the cooking time is the same.
When using the timer control for the very first time, it
is advisable to let it operate while you are at home.
The displays can be checked to show that it is
operating correctly and you will feel confident to
leave a meal to cook automatically in the future.
A) To Set The Timer To Switch On And
Off Automatically
i) Ensure the electricity supply is switched ON and
that the correct time of day is displayed, e.g. 9.
a.m. as Fig. 6.
ii) Place food in oven.
iii) To set the length of cooking time, press the
cooking hours button ( ), press the increase
control ( + ) until the cooking time is displayed,
e.g. 2 hrs 15 mins. as Fig. 7.
iv) Release the buttons. The AUTO display and
cooking symbols will glow.
Remember, this must be completed within 4
seconds of first pressing the cooking hours
button.
v) Set the STOP time. Press the stop time button
( ) press the increase control ( + ) until the
required stop time is displayed, e.g. 12.15 p.m.
as Fig. 8.
vi) Release the buttons the cooking symbol will go
out and the time of day will be displayed after 5
seconds
vii) Set the oven control to the required temperature.
The oven indicator neon should be OFF and the
AUTO display will glow.
NOTE: When the automatic timed period starts
the main oven indicator neon will turn ON and
OFF during cooking.
Fig. 5.
Fig. 6.
Fig. 7.
Fig. 8.