Filter
Top Products
Aluminium based saucepans can leave shiny metal marks on the pan
supports. Clean the pan supports regularly to remove the marks using a
mild abrasive like 'Cif' with a soft scourer. For more stubborn marks you
can use a soap-filled pad such as 'Brillo'.
After cleaning the appliance parts, dry
them thoroughly before you put them back.
When replacing hotplate burner parts
1. Crown to body (Do not try to
force the crown on to the body).
Make sure that the hole in the
crown is over the electrode.
Check that the two longer location
pegs sit in the slots in the body.
When the crown is in this position
let it fall freely on to the body.
Check that the crown can be
moved slightly from side to side.
2. Cap to crown
Place cap centrally on the top of
crown (enamel side up). Move
sideways and front to back to
check the cap is properly fitted.
3. Check for ignition
If a burner will not light then you
need to check the crown and cap
positions.
Z C G 8 0 2 1
28
C
are and cleaning