Filter
Top Products
10
Setting the water softener electronically (see table)
The dishwasher must
be switched off.
Switch on the
dishwasher by pressing
the On/Off button.
The digital display
indicates the current
level.
To change the level,
press function button 1.
Each time the button is
pressed the level
increases. (For the
selection of the new
level see the chart).
The digital display
indicates the new level
set. (Level 1 follows
level 10).
To memorise the
operation, switch off the
dishwasher by pressing
the On/Off button.
Press and hold
simultaneously function
buttons 2 and 3 until the
lights of function
buttons 1, 2 and 3 start
flashing.
Release the buttons
and then press function
button 1; the lights of
function buttons 2 and 3
turn off while function
button 1 goes on
flashing.
The water softener is factory set at position 5.
156999 58/0en 17-03-2006 14:09 Pagina 10