Filter
Top Products
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Turn on the water tap
3. Press the On/Off button
The On/Off indicator light illuminates.
4. Setting and starting the programme
Select the washing programme and delay start with the
door slightly opened. The start of the programme or the
countdown of the delay start will occur only after the
closure of the door. Until that moment it is possible to
modify the set made.
To select a programme, press the button of the
programme you wish to select, (see "Washing
programmes" chart), the indicator light of the button
illuminates and in the digital display will appear, flashing,
the running time of the programme that has been set (in
minutes).
The Wash indicator light illuminates.
Close the dishwasher’s door, the programme starts
automatically.
In the digital display the running time of the programme
will no longer flash, the Wash indicator light remains
illuminated.
Setting and starting the programme with the
delay start
After having selected the washing programme press the
delay start button until the flashing number of the hours for
the delay start will appear in the digital display (from 1h to
19h).
Close the dishwasher’s door, the countdown starts
automatically.
The countdown will decrease with steps of 1 hour.
The opening of the door during the countdown will not
modify the delay start.
Once the delay start has elapsed the programme will start
automatically.
Note: With the delay start function set, the Wash indicator
light is off. Once the countdown of the delay start has
elapsed, the washing programme will start automatically
and the Wash indicator light will illuminate.
Note: the selection of the washing programme and delay
start can also occur with the door closed. Keep in mind
that in this way, once a washing programme button is
pressed you have ONLY 3 seconds in which you can
choose another programme or select a delay start, after
which the selected programme will start automatically.
5. To interrupt or cancel a washing
programme in progress
Interrupt or cancel a washing programme in progress
ONLY if it’s absolutely necessary.
Attention! Hot steam may escape when the door is
opened. Open the door carefully.
Interrupt a washing programme in progress
a) Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the point
at which it was interrupted.
Hot steam may escape when the door is opened.
There is risk of scalding.
b) Press the On/Off button, in this case all the indicator
lights turn off. Press the On/Off button again; the
programme will start from the point at which it was
interrupted.
Cancel a washing programme in progress
To cancel a washing programme you have to reset the
dishwasher; press simultaneously function buttons 2 and 3
for about 2 seconds. After about 2 seconds all the indicator
lights will turn off (except for the On/Off indicator light and
eventually the rinse aid and salt indicator lights) indicating
that the running programme has been cancelled.
If a new washing programme is to be selected, check that
there is detergent in the detergent dispenser.
6. To cancel a delay start
To cancel a delay start in progress you have to reset the
dishwasher; follow the same instructions given in "To
cancel a washing programme in progress". Cancelling a
delay start involves also the cancelling of the washing
programme set. In this case you have to set the washing
programme again.
7. End of the washing programme
The dishwasher will automatically stop.
The Wash indicator light turns off.
The End indicator light is illuminated.
The indicator light of the programme just ended will remain
on.
In the digital display appears 0, only in this case the
programme has ended.
Switch off the dishwasher by pressing the On/Off button.
Open the dishwasher’s door, leave it ajar and wait a few
minutes before removing the dishes; in this way they will
be cooler and the drying will be improved.
8. Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should
therefore be allowed to cool down before removing from
the appliance.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
Water may appear on the sides and the door of the
dishwasher as the stainless steel will eventually become
cooler than the dishes.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and
the water tap turned off.
Starting a washing programme
14