Zanussi ZDT40 Dishwasher User Manual


 
The wash results are not satisfactory
There are streaks, milky spots or a bluish coating on
glasses and dishes
Decrease rinse aid dosing.
Water drops have dries onto glasses and dishes Increase rinse aid dosing.
The detergent may be the cause. Contact the de-
tergent manufacturer’s consumer care line.
If after all these checks, the problem persists,
contact your local Service Force Centre.
Consumption values
The consumption values are intended as a
guide and depends on the pressure and the
temperature of the water and also by the var-
iations of the power supply and the amount of
dishes.
Consumption values
Programme Programme duration (in
minutes)
Energy consumption (in
kWh)
Water (litres)
65°
105-115 1,5-1,7 23-25
30'
30 0,9 9
50°
140 1,05 16
12 0,1 5
Technical data
Dimensions Width x Height x Depth (cm) 59,6 x 81,8-87,8 x 55,5
Electrical connection
Voltage - Overall power - Fuse
Information on the electrical connection is given on the rating plate on the
inner edge of the dishwasher’s door.
Water supply pressure Minimum - Maximum
(MPa)
0,05 - 0,8
20