Filter
Top Products
Programme selection/cancel button
(PROGRAM. SELECTION): the selection of a washing
programme occurs by the means of this button, press it until
the indicator light corresponding to the desired washing
programme illuminates (see "Washing programmes" chart).
The END OF CYCLE indicator light flashes.
Once the washing programme has been set, close the
dishwasher’s door, the programme will start automatically.
With this button it is also possible to:
- cancel a washing programme in progress,
- set the level of the water softener (see specific paragraph),
- deactivate/activate the audible signals.
Indicator lights: have the following meanings:
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing.
- end of washing programme,
- the setting of the water softener,
- malfunction of the machine.
Deactivation/activation of the audible signals
Factory setting: audible signals activated.
1. With the dishwasher switched off, press the On/Off button.
The END OF CYCLE indicator light flashes (setting mode).
In case salt and/or rinse aid refilling is necessary the
corresponding indicator lights illuminate.
If one of the washing programme indicator lights is on, this
means that a washing programme has been set.
The setting must be cancelled: press for about 3 seconds
the programme selection/cancel button; the indicator
light of the set programme turns off and the END OF
CYCLE indicator light flashes, indicating that the set
programme has been cancelled and that the machine is
now in setting mode.
2. Press and keep pressed the programme selection/cancel
button until the programme indicator light 1 illuminates and
programme indicator light 2 flashes.
Press the programme selection/cancel button again, the
programme indicator light 1 starts flashing and the
programme indicator light 2 turns on with a fixed light to
indicate that you have activated the function for the
deactivation/activation of the audible signals.
The constant illumination of the END OF CYCLE indicator
light means that the audible signals are activated.
3. To deactivate the audible signals, press the programme
selection/cancel button again, the END OF CYCLE
indicator light turns off indicating that the audible signals are
deactivated.
5. To memorise the operation, switch off the machine by
pressing the On/Off button or wait for about 60 seconds,
after which the machine will automatically return to setting
mode.
To activate again the audible signals simply follow the above
operations until the END OF CYCLE indicator light illuminates.
The control panel
5
Indicator lights
Washing programmes
On/Off button
Programme selection/cancel button
Programme indicator lights
END OF illuminates when the washing programme
CYCLE has ended.
It also has added functions of visual signalling
as:
- the setting of the water softener,
- deactivation/activation of the audible signals,
- intervention of an alarm due to the
malfunction of the machine.
SALT refilling indicator light: illuminates when the
salt has run out.