Filter
Top Products
Function buttons: in addition to the selection of the
washing programme and the half load option, the following
functions can also be set with the help of these buttons:
- water softener setting,
- the cancelling of a washing programme in progress,
- deactivation/activation of the audible signals.
Programme selection buttons: allow the selection of
the desired washing programme (see "Washing programmes"
chart).
«Delay start» button: this option allows the start of the
programme to be delayed from 1 to 19 hours.
The digital display indicates:
- the level of hardness to which the water softener is set
- if the audible signals are activated/deactivated,
- The number corresponding to the selected washing
programme,
- the delay start,
- the approximative remaining time of the running programme,
- fault codes concerning malfunction of the dishwasher.
Indicator lights: have the following meanings:
«Half load» button: this option is useful and economical
when only a few dishes need washing.
Remember to load both baskets.
This option is available with some programmes (see "Washing
programmes" chart).
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- setting of the water softener,
- end of the washing programme,
- something not working with the machine
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
Factory setting: audible signals activated
1. Press the On/Off button. The indicator lights of the
programme selection buttons will illuminate and in the digital
display are visible 2 horizontal lines (--) (setting mode).
If other button indicator lights are on and in the digital
display is visible the number of a programme (1 - 2 - 3 etc..),
this means that a washing programme has been set.
The programme must be cancelled: press simultaneously
the function buttons 2 and 3 for about 2 seconds, the
indicator lights of the programme selection buttons will
start flashing. After about 2 seconds the indicator lights of
the programme selection buttons will illuminate with a fixed
light and in the digital display will appear 2 horizontal lines
(--) indicating that the set programme has been cancelled
and the machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press the function button 3, the indicator lights of function
buttons 1 and 2 turn off while the indicator light of the
function button 3 goes on flashing, the digital display
indicates the current setting.
4. To change the current setting, press again the function
button 3, the digital display will indicate the new setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
The control panel
5
On/Off button
Function buttons
Digital display
Delay start button
Half load button
Indicator lights
Programme selection buttons
Salt refilling indicator light, illuminates when the salt
has run out.
Rinse aid refilling indicator light, illuminates when
rinse aid has run out.
End of cycle: illuminates when the washing
programme has ended.
«Half load» available - button activated
- indicator light on
«Half load» not available - button deactivated
- indicator light off
Audible signals deactivated
Audible signals activated (factory set)