Care and cleaning
Caution! Unplug the appliance before carrying out
any maintenance operation.
This appliance contains hydrocarbons in its cooling
unit; maintenance and recharging must therefore
only be carried out by authorized technicians.
Defrosting the freezer
Defrost the freezer when the frost layer reaches a thickness
of about 10-15 mm.
The best time to defrost the freezer when it contains no or
only a little food.
To remove the frost, do these steps:
1. Switch off the appliance.
2. Remove any stored food, wrap it in several layers of
newspaper and put it in a cool place.
3. Leave the lid open , remove the plug from the defrost
water drain and collect all defrost water on a tray. Use
a scraper to remove ice quickly.
4. When defrosting is completed, dry the interior thor-
oughly and refit the plug.
5. Switch on the appliance.
6. Set the temperature regulator to obtain the maximum
coldness and run the appliance for two or three hours
using this setting.
7. Reload the previously removed food into the com-
partment.
Important! Never use sharp metal tools to scrape off frost
as you could damage the appliance. Do not use a
mechanical device or any artificial means to speed up the
thawing process other than those recommended by the
manufacturer. A temperature rise of the frozen food packs,
during defrosting, may shorten their safe storage life.
Technical data
ZFC627WAP ZFC631WAP
Dimension
Height 868 mm 876 mm
Width 935 mm 1050 mm
Depth 665 mm 665 mm
Rising Time 32 h 32 h
The technical information are situated in the rating plate
on the external right side of the appliance and in the energy
label.
Installation
Positioning
This appliance can be installed in a dry, well ventilated
indoor (garage or cellar), but for optimum performance
install the appliance at a location where the ambient tem-
perature corresponds to the climate class indicated on the
rating plate of the appliance:
Climate
class
Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
5