Filter
Top Products
7
DOOR REVERSAL INSTRUCTIONS
Unplug the appliance from the power supply before
carrying out the below- mentioned operations.
Remove the ventilation grill (D).
Unscrew the bottom hinge (E).
Remove the freezer door by releasing it from the
middle hinge (H).
Unscrew the middle hinge.
Remove the fridge door by releasing it from the top
hinge pin (5).
Remove the pin and refit it on the other side.
Replace the fridge door, and replace the middle
hinge to the left hand side.
Replace the freezer door.
Screw down the bottom hinge (E) on the opposite
side by using the screws previously removed.
Remove the plug (F) from the ventilation grill (D)
and replace it on the opposite side. Re-assemble the
ventilation grill (D).
The doors can be aligned by adjusting the middle
hinge, with help of a tool, after having slackened the
two screws.
Warning:
After having reversed the opening direction of the doors
check that all the screws are properly tightened and that
the magnetic seal adheres to the cabinet. If the ambient
temperature is cold (i.e. in Winter), the gasket may
not fit perfectly to the cabinet. In that case, wait for
the natural fitting of the gasket or accelerate this
process by heating up the part involved with a
normal hairdrier.
Fig. 5
Fig. 5a
Fig. 5b
Fig. 5c
E
F
D
D640
F
F
F
5
D548
D419
D405
H