13
Drink dispenser
The container for cooling drinks (Fig. 9) is located in
the door of the fridge. It is easily removed from its
runners for filling and cleaning by pushing it upwards
from the left side and then by pulling sharply
outwards. Remove the clip on lid to fill.
To pour a drink, press a glass upwards against the tap
arms. To stop the flow of liquid remove the glass.
Before using the dispenser, we recommend that you
rinse it several times with hot water. For a thorough
cleaning of the container add a spoonful of
bicarbonate of soda to the rinsing water. Push the
dispenser tap on and off several times to allow sugar
deposits from soft drinks or wines to dissolve, or
alternatively remove for cleaning by unscrewing in an
anticlockwise direction. Empty the container and
rinse thoroughly with clean water.
If using the dispenser to store fresh fruit juice,
particular attention should be paid to the
manufacturers storage instructions. It is also advisable
to clean the dispenser thoroughly between every
filling, using a solution of sterilising fluid.
Use and features of the «CRISP’N
FRESH» filter
“Crisp’N Fresh” is the glass shelf on top of the salad
crispers which is fitted with special removable green
filters.
These filters allow cool air from the fridge to circulate
through the drawers but help prevent moisture loss.
By retaining moisture in foods such as fresh fruit,
vegetables and salad they are kept fresher for longer.
Cleaning the filter
The filter is held by two small support frames which
press into position and are therefore easily removed
for cleaning. To do this, turn the glass shelf upside
down and release the frames as shown in Fig. 11. The
filters and the glass cover can be washed gently in
warm soapy water, they should not be put in the
dishwasher.
Fig. 9
Fig. 10
Fig. 11
D208
D689
D003