Filter
Top Products
7
Charcoal Filters
In the recirculation mode the charcoal fi lters
absorb smells and unwanted odours.
The charcoal fi lters cannot be cleaned, we
recommend they should be replaced
approximately every three months or more often
if the hood is used for more than three hours per
day.
To Remove/Replace the
Charcoal Filters
1. First remove the metal grease fi lters.
2. Rotate the charcoal fi lter anti-clockwise
(A) and remove.
3. To replace the charcoal fi lters, remove
the metal grease fi lters.
4. Place the fi lter over the inlet grille at
either end of the fan housing and rotate
clockwise (B) into position.
This appliance can be a possible fi re
hazard if the grease and charcoal fi lters
are not cleaned and replaced as recommended.
Changing the Light Bulb
1. Remove the screw fastening the lamp cover.
2. Rotate the light bulb anti-clockwise to
unscrew.
3. To replace the light bulb insert a
replacement into the holder then rotate
the bulb clockwise into position. Ensure
you take care not to overtighten the
bulb.
4. Replace the lamp cover.
If the light bulb fails to function check that the
bulb is fully screwed into the holder. If bulb
failure has occurred then it should be replaced
with a 220-240 Volt 40W clear globe shaped
bulb with a small E14 screw thread.
Replacement fi lters and light bulbs can be obtained
from your local Service Force Centre.
MAINTENANCE AND CLEANING
A
B