Zanussi ZI 7165 Refrigerator User Manual


 
7
The guide consists of a temperature sensitive strip
sealed in a shelf trim.
When the fridge is operating at the safe temperature
to store food the guide will appear black. If the
temperature rises above this level the guide will show
the words TOO WARM.
Positioning of the Cool Check
The shelf with the cool check temperature guide must
be placed in the fridge according to the instructions
located on the fridge wall and always ensure the guide
is at the front.
If the Cool Check Shows too Warm
In certain conditions the temperature guide may show
TOO WARM.
The fridge is switched off
The door has been recently opened
A quantity of warmer food has been introduced to
the fridge
The fridge temperature is above the recommended
maximun for the safer storage of food.
The coolcheck will change to show “TOO WARM” very
quickly after the door has been opened. It will however
take a number of hours to return to black, indicating
that the temperature is correct.
The appliance should be left overnight and the
coolcheck examined in the morning. If the coolcheck
shows TOO WARM, turn the appliance to a colder
setting leave overnight and examine again the
following morning.
Hits and tips
The guide is only suitable for use in the
model supplied.
The guide will not operate in the freezer
compartment.
When cleaning the shelf take care not to
immerse in water, and wipe away any spills.
Cool Check Guide
TOO WARM