Filter
Top Products
18
Instructions for totally built-in appliances
Recess dimensions
Height 1125 mm
Depth 550 mm
Width 560 mm
The applianceÕs door has been locked in position
for transport by means of pins on both sides.
According to the door opening direction, remove
relevant pins at the top and at the bottom.
To ensure adequate ventilation, allow the clearances
shown in figure.
Furthermore, it is necessary that the cabinet has a
ventilation recess with the following dimensions:
depth 50 mm
width 540 mm
50 mm
min.
cm
2
200
200 cm
2
min.
D567
PR01
540
50
B
T
H
Push appliance into housing until stop strip (A)
touches the kitchen unit.
Open the door and push the appliance against the
side of the kitchen unit opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the
kit included with the appliance.
Snap ventilation grille (C) and hinge cover (D) into
position
A
D022
D727
C
D