Zanussi ZI 8454 X Freezer User Manual


 
9
Before carrying out any maintenance operations,
including those described in this book, unplug
the appliance from the mains supply.
Warning
This appliance contains hydrocarbons in its cooling
unit; maintenance and recharging must therefore
only be carried out by authorized technicians.
Periodic cleaning
Clean the inside of the appliance and the accesso-
ries with a solution of lukewarm water and bicar-
bonate of soda (5 ml to 0.5 litre of water). Rinse and
dry thoroughly.
The freezer compartment drawers can be removed
for washing. To remove the drawers, pull them out
until they reach the stop, then lift and withdraw them
from the guides. To refit the drawers, engage them in
the guides then, keeping them tilted, push them
inwards.
Defrosting of the refrigerator
To achieve automatic defrosting of the refrigerator,
the compressor must cut out from time to time. If the
bottom of the compartment becomes covered with
too much frost, turn the thermostat knob slowly
towards a warmer setting until the compressor starts
to cut out periodically.
It is important to periodically clean the defrost water
drain hole in the middle of the refrigerator
compartment channel to prevent the water
overflowing and dripping onto the food inside. Use
the special cleaner provided, which you will find
already inserted into the drain hole.
Important:
Never use sharp metal tools to scrape off frost
from the evaporator as you could damage it.
Do not use a maechanical device or any artificial
means to speed up the thawing process other
than those recommended by the manufacturer.
D037
MAINTENANCE AND CLEANING
12
CUSTOMER CARE DEPARTMENT
In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your
local Zanussi Service Force Centre by telephoning:-
0870 5 929929
Your telephone call will be automatically routed to the Service Force Centre covering your post code area.
For the address of your local Service Force Centre and further information about Service Force, please visit the
website at www.serviceforce.co.uk
Before calling out an engineer, please ensure you have read the details under the heading ÔSomething Not
Working?
When you contact the Service Force Centre you will need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of the fault
4. The model and serial number of the appliance (found on the rating plate)
5. The purchase date
Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee
service calls.
For general enquiries concerning your Zanussi appliance or for further information on Zanussi products,
please contact our Customer Care Department by letter or telephone at the address below or visit our website
at www
.zanussi.co.uk
Customer Care Department
Zanussi
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: 08705 727 727 (*)
* calls to this number may be recorded for training purposes.
SERVICE AND SPARE PARTS