Filter
Top Products
17
Push appliance into housing until stop strip (A)
touches the kitchen unit.
For a correct alignment make sure that the distance
between the appliance and the cabinet is 44 mm.
Open the door and push the appliance against the
side of the kitchen unit opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the
kit included with the appliance.
Snap the ventilation grille (C) and hinge cover (D)
into position
Press in the joint covers between the appliance and
the kitchen unit.
A
D023
D
C
D723
D724
D726
B
Apply covers (B) on joint cover lugs and into hinge
holes.
44 mm