Filter
Top Products
29
• Close the door and check that the small door is
positioned at the required height, removing the
bracket cover and operating the adjustment
screws if necessary.
• Use the same adjustment screws to align the
doors vertically.
• Check horizontal alignment of the outer door
panels and, if necessary, correct their position by
moving them along the slots.
• Open the door.
Adjust the levelness of the small doors by means
of the bracket and small bottom bracket.
• After aligning the doors, fix the nuts of the bracket
and the screws of the small bottom bracket.
• Then refit the bracket cover.
Adjustment panels (if necessary)
=
=
10