Zanussi ZNB 404 W Freezer User Manual


 
8
The Refrigerator
Below is the recommended storage positions for various
food types:
1. Ready-cooked foods, fresh meat, cold cuts.
2. Milk, dairy products.
3. Fruits, vegetables, salads.
4. Cheese, butter.
5. Eggs.
6. Yoghurt, sour cream.
7. Small bottles, drinks.
8. Large bottles, drinks.
9. Fish, meat, seafood
Drawer
The drawer is suitable for storing fruit and vegetables.
There is a separator inside the drawer that can be placed in
different positions to allow you to separate food if required.
ACTION COOL mode
The ACTION COOL function is suited for quick cooling of
large quantities of goods in the refrigerator.
The ACTION COOL function is switched on by pressing the
ACTION COOL button ("E").
The yellow light ("F") illuminates. During the time of ACTION
COOL the display ("B") shows an "A" letter.
The ACTION COOL function now provides for intensive
cooling. A desired temperature of +2 °C is automatically
selected.
To exit from the ACTION COOL mode press the "E" button
again. Should you not do so, after a while the refrigerator
returns to automatic mode.
Fresh Box
The Fresh Box is located in the fridge compartment. This is
designed for the best storage of fresh food like fish, meat,
seafood because the tempereture is lower here than in the
rest of the fridge. It is placed in the lower part, directly
above of the vegetable drawer.
If you wish to remove the compartment, make sure to
perform the following:
1 Open the refrigerator door as wide as possible. If due to
a limit stop or any other object you cannot open the door at
an angle of 180°, you should remove the bottle shelf from
the door.
2 Pull the LTC compartment towards yourself and, upon
reaching the end point, slightly lift the front of the drawer to
remove it from the support frame.
3 For the removal of the support frame, lift the back of the
frame from its nest and then pull it towards yourself. You can
remove both the frame and the drawer at the same time by
following Step 3.
When you want to restore the original condition, repeat
above steps in reverse order.