Filter
Top Products
5
Before cooking for the first time, carefully wash
the oven accessories.
Once the oven has been installed:
a) set the thermostat knob to MAX (250);
b) switch the oven function control knob to conventional
cooking ( );
c) allow the oven to run empty for approximately 45
minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may be emitted.
This is absolutely normal, and is caused by residues of
manufacturing.
Repeat this operation for the grill and fan cooking function.
Once this operation is carried out, let the oven cool down,
then clean the oven cavity with a soft cloth soaked in warm
soapy water.
FO 2161
Fig. 4
To open the oven door, always catch the
handle in its central part (Fig. 4).
When the oven is first installed
End of cooking programmer
This device (Fig. 3) allows you to make the oven switch
off automatically once the preset time is over. An acousitic
signal will be heard when the cooking is completed.The
cooking duration can be set up to 90 minutes maximum.
Place food in the oven and turn the oven function control
knob and the thermostat control knob on the required
settings. Turn the timer knob to maximum time position
("90"), then turn it back to set the required cooking time.
When the cooking time is over, an acoustic alarm will
sound and the oven will switch off automatically.
Turn the timer knob on to set the oven on manual
operation.
Fig. 3
5
10
15
30
45
60
75
90
FO2675