Filter
Top Products
Clock functions
Electronic programmer
1 2 3
456
1 Function Indicators
2 Time display
3 Function Indicators
4 Button "+"
5 Selector Button
6 Button "-"
Clock function Application
Time of day Shows the time. To set, change or check the time.
Minute minder To set a countdown time.
A signal sounds, after the time period is completed.
This function has no effect on the operation of the oven.
Duration To set how long the oven has to be in operation.
End To set the switch-off time for an oven function.
Duration and End can be used at the same
time, if the oven is to be switched on and off auto-
matically later. In this case first set Duration
, then
End
.
Setting the clock functions
1. Set an oven function and temperature (not necessary
for Minute Minder).
2. Push the Selection button again and again until the
indicator for necessary clock function flashes.
3.
To set the time for Minute minder
, Duration
or End , push "+" or "-" button.
The indicator for related clock function comes on.
When the time period ends, the indicator for the
clock function flashes and an acoustic signal sounds
for 2 minutes.
With the functions Duration
and End the ap-
pliance deactivates automatically.
4. Push any button to stop the signal.
5. Turn the knob for the oven function and the knob for
the temperature to the Off position.
Cancelling the clock functions
1. Press the Selection button again and again until the
indicator for the necessary function flashes.
2. Press and hold the button "- " until an acoustic sig-
nal sounds.
7