Filter
Top Products
1. Remove the plug from
the power socket.
2. Tilt back the appliance
carefully so that the com-
pressor cannot touch the
floor.
3. Unscrew both adjustable
feet.
4. Unscrew the screws of
the door bottom hinge.
5. Take off the appliance
door by pulling it slightly
downwards.
6. Unscrew the top door
hinge pin of the appliance
then screw it back on the
other side.
7. Fit the appliance door on
the upper door hinge pin.
8. Remove the lower hinge.
Put over the pin in the di-
rection of the arrow.
9. Unscrew and install the
screw on the opposite side.
10. Install the lower hinge
on the opposite side leav-
ing the position of the door
unchanged.
11. Screw in the one screw
in the place set free on the
other side as well as the ad-
justable feet (2 pieces).
12. Remove and install the
handle
1)
on the opposite
side.
13. Reposition, level the
appliance, wait for at least
four hours and then con-
nect it to the power socket.
1) If foreseen
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
In case you do not want to carry out the above mentioned
operations, contact the nearest After Sales Service Force.
The After Sales Service specialist will carry out the rever-
sibility of the doors at your cost.
7