Filter
Top Products
6. Unscrew the bottom far
side screw and install on
the opposite side.
7. Unscrew the top door
holding pin.
8. Screw the pin back on
the other side.
9. Fit the doors into the
pins and install the doors.
Install the hinge.
3
2
1
10. On the opposite site,
install the hole covers pro-
vided within the accessory
bag.
11. Tighten the hinge.
Make sure that the doors
are aligned.
12. Remove and install the
handle
1)
13. Reposition, level the
appliance, wait for at least
four hours and then con-
nect it to the power socket.
1) If foreseen
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
In case you do not want to carry out the above men-
tioned operations, contact the nearest After Sales Serv-
ice Force. The After Sales Service specialist will carry
out the reversibility of the doors at your cost.
Electrical Connection
Caution! Any electrical work required to install
this appliance should be carried out by a qualified
electrician or competent person.
Warning! This appliance must be earthed.
The manufacturer declines any liability should
these safety measures not be observed.
1 2
3
4
5
Important! The wires in the mains lead are coloured in
accordance with the following code:
8