Zanussi ZU 8124 Refrigerator User Manual


 
12
Replace light bulb
1
Warning! There is a risk of electric
shocks! Before changing the light bulb,
switch off the appliance and unplug it, or
pull the fuse or the circuit breaker.
Light bulb data: 220-240 V, max. 15 W,
fitting: E 14
0
To switch off the appliance, turn the tempe-
rature regulator to position "0".
0
Unplug the mains plug.
0
To change the light bulb, undo the cross
head screw and remove the light bulb
cover downwards.
0
Change the defective light bulb.
0
Refit the light bulb cover and the cross
head screw.
Something not Working
Before contacting your local service force centre, check the following points.
Sympton Solution
No power to the appliance.
Check there is power at the socket
Check there is not a power cut by checking the
household lights.
Check the fuse has not blown.
The temperature in the refrigerator is too high.
Check the ambient temperature is within the
appliances operating limits
Check the thermostat is turned to the correct set-
ting relative to ambient conditions.
The compressor runs continuously
Adjust the thermostat to give correct temperature
control, see page 8
Check that the door is closed.
Large quantities of food have recently been pla-
ced in the cabinet and/or door is frequently ope-
ned.
Check that air ventilation is not obstructed.
The light does not come on.
Ensure the bulb is correctly fitted.
Replace the bulb it has blown.
Check the door light switch is not jammed.