Filter
Top Products
29
To programme the pyrolytic cleaning
cycle (delayed start, automatic stop)
If you desire, you can programme the starting and
ending time of the pyrolytic cleaning cycle.
1. Press button to switch on the oven. Press
button as often as necessary, until the
“Pyro“ function symbol (level 1 - P I)
appears in the display.
Simultaneously the “Pyro” message and the
symbol will flash in the display and
an acoustic signal will be emitted. This means
that, before activating the pyrolytic cleaning
function, you have to remove the shelf supports
and all the oven accessories (as explained in
the previous paragraph).
2. The cooking duration symbol will flash
for some seconds; during this time push ' '
or ' ' buttons to select the pyrolytic 1 (P I) or
pyrolytic 2 (P 2) function.
3. Once you have chosen the desired pyrolytic
function, “Pyro” will flash in the display waiting
for confirmation to start the pyrolytic cleaning
function.
At this time, push the time function button
(Fig. 24). The end of cooking symbol
and the arrow symbol will flash.
The control panel will display the end of the
cleaning cycle (that is, the actual time +
cooking duration time).
Push ' ' or ' ' buttons to select the required
end of cycle time (Fig. 24). After a few seconds,
the “Pyro” message and the symbol
will stop flashing, the acoustic signal will stop
while the cooking duration symbol will
flash until the pyrolytic cleaning cycle start.
4. After some time, the door lock will be activated
and the related symbol will be displayed.
At the end of the pyrolytic cleaning process, the
display shows the time of day. The oven door is
locked.
Once the oven has cooled down, an acoustic signal
will be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time,
press button .
Fig. 24