Filter
Top Products
Installation - External & In-Line Blower Preparation
Note1: A cable lock (not included) may be re-
quired by local codes. Please review local co-
des for more information.
6. Reinstall the cover on the motor housing by
following the instructions from step 2 in re-
verse order.
7. Attach 6 pin male molex connectors to 6 pin
female molex connectors inside blower hou-
sing. See Fig. 6
Note2: Check local codes to determine mini-
mum wire gauge.
See manual included with external and in-
line blower for instructions on installing the
blower.
- 15 -