Filter
Top Products
Installation - Internal Blower
4. Rotate the blower plate
(Note! If air is discharged
from the top, do not rotate
the plate).Place the 6" metal-
lic ange on the blower's air
outlet (the ange may alre-
ady be pre-installed). Install
internal blower into blower
plate and secure using (4)
screws included with the blo-
wer. See Fig.4
5. Fasten the two brackets to the
sides of the blower by xing
them onto the blower plate
with the (4 type B) screws,
and to the sides of the blower
with other (4 type C) screws.
Fig 5
6. Secure capacitor box con-
nected to the provided
cable to the blower plate
using (2 type B) screws in-
cluded with the blower. See.
Fig.6
7. Secure Green/Yellow ground
wire connected to the cable
to the provided capacitor to
blower plate. (type A). Fig.7
- 11 -