Zephyr AK7548ASX Ventilation Hood User Manual


 
15
Blower On/Off
By pressing , the blower is switched On and Off. When switched on, the blower turns on at the same
speed it was switched off at. When switched off the entire hood powers off, including the lights.
Speed Selection
The 3 speed levels are selected by pressing to decrease and to increase speed level. The
display indicates speed level selected. Pressing when the hood is off will also turn it on.
Delay Off
This is used for programmed shut down of blower and lights 5 minutes after the function is
activated. Press once, a dot displays in the lower right hand side of display indicating
the function is on. The hood will change to speed 1 and shut down after 5 minutes.
Lights On/Dim/Off
Manual On/Off
Switch lights On by pressing once, again to dim and again to switch Off.
Located behind the right side light panel is a manual power on/off toggle switch. This switch is used
to manually cut power to the hood to perform a hard reset for troubleshooting purposes. Toggle
between I (on) or 0 (off).
Heat Lamps On/Off
Located on the right and left side light panel are manual power on/off toggle switches. These
switches are used to turn the heat lamps on/off. Toggle between I (on) or 0 (off).
Blower On/Off
Adjust 3 Speed Levels
5 Min Delay Off
Lights On/Dim/Off
Display
(Speed level, Delay Off Indicator)
1
1
2
2
3
3
4
4
Display
Displays blower speed level and delay off status.
5
5
Features & Controls – Touch Controls & Features