Filter
Top Products
Installation - Internal Blower
6. Attach the 6 pin male molex connector from
blower wire to the 6 pin female molex con-
nector located inside the blower housing. See
Fig.6
7. Install the motor and bracket, inside the motor
housing, completing the installation using the
other screws (6 type B) that have been sup-
plied. (Tot. 13 type B)Fig. 7
8. Connect 9 pin male molex connector from
blower wire to 9 pin female molex connector
on the capacitor wire. See
Fig.8
WARNING! Place electrical
wiring inside the blower hou-
sing.
The hood is now ready to be
installed on the wall.
- 11 -