A SERVICE OF

logo

Open as PDF
next previous
2-214
SET RMON HOST INTERFACE
SET RMON HOST
INTERFACE
Use the SET RMON HOST INTERFACE command to enable host table collection.
The RMON agent in the DMM detects hosts on the network by observing
source and destination addresses in network packets. It creates an entry in the
RMON host table for each detected host. The RMON agent also collects traffic
statistics for each host based on observed network packets.
Format
Example
The following command enables host table monitoring by the RMON agent:
CB5000> set rmon host interface 1
Entry 1 created.
Related Commands
CLEAR RMON HOST
SHOW RMON HOST
index The index number of the DMM’s RMON interface.
set rmon host interface
index