802.11g Wireless Router
Quick Installation Guide
In the Address box, enter
the following:
HTTP://192.168.1.254
The following screen will
come up. The default user
blank.
Press the Setup
configure the router.
wireless router for Internet
Access.
below to select the type of
Internet Access you have.
Click Next to continue
and follow the on-
instructions.
Type of Internet Access Connection Type Data Required
None
Usually, none.
But some ISP may require a particular Hostname
Domain name, or MAC (physical) address.
PPPoE Login name and password.
Cable modem
(TV-style cable)
L2TP Login name and password, Server IP Address.
DSL/ADSL modem
(phone-type cable)
PPPoE Login name and password.
PPTP Login name and password, Server IP Address.
L2TP Login name and password, Server IP Address.
None
Usually, none.
But some ISP may require a particular Hostname,
Domain name, or MAC (physical) address.
Telstra Bigpond Cable
(Australia)
Please enter the Server IP Address, Login User Name and Login Password.
SingTel RAS Please enter the Login User Name, Login Password and RAS Plan (512K or
64K).
Other (e.g. Fixed Wireless) Please choose one of the two ways for your Internet Connection: Dynamic
IP Address assignment or Static IP Address assignment.
On the final screen of the
Setup Wizard, click Finish
to complete the
configuration. Wait for a
while and the system will
run a test of your Internet
Connection.
finished, the message will
appear to ask you to press
when you wish to exit the
Wizard.
Start your Web Browser o
to connect to a well-
www.google.com.tw) to check that an Internet
connection can be established.
•
If the connection fails, check both your data
of step 4~15 and the Cable/DSL modem.
• If you have any problems or a
setup using this Quick Install Guide, please
refer to the complete User's Guide found on
the CD.
Notes
Notes
M73-AP009-730
