A SERVICE OF

logo

Configuration Procedure
Configuration and Monitor Utility
for Windows 98SE/ME/2000
After installing the device successfully, go to
Start Æ Programs Æ 802.11 Wireless +
USB 10&100 LAN Æ Configuration and
Monitor Utility.
The Wireless LAN Monitor Utility icon will
appear in the taskbar every time the device is
running. You can open it by double-clicking on
this icon.
Icon Status
Mode Icon Link Status
Red. The station is not
associated to an Access
Point.
Access Point
mode
Blue. The station
associates itself to an
Access Point.
Red. The color is red
only when the card is
during resetting or
initializing procedure.
Peer-to-Peer
mode
Blue. Peer-to-Peer mode
is activated.
Note: Except for the following
configuration utility, using Windows to
configure the wireless network settings in
the Windows XP is recommended. (Please
skip to the Configuration for Windows
XP
section)
-
6 -