EtherHub 1500 System User’s Guide
Setup and Configuration 4-11
Downloading System Software
Use the Download command from the System Menu to load
available software updates into the agent’s flash ROM. The
download file should be an EtherHub 1500 *.bin file from
Accton Technology Corporation; otherwise the agent will not
accept it.
Invoking this command brings up the Download dialog box.
When all entries are confirmed, the display will change to show
the progress of the download process. After downloading the
new software, the agent will automatically restart itself. The
following describes each entry in the dialog box:
Parameter Description
Timeout Time to wait for a response.
Retry Number of attempts to make contact.
Filename The *.bin file to download.
Transferred Block Current number of data block being transferred.
Total Blocks Total number of blocks to transfer.
Restarting the Agent
Use the Restart command from the System menu to reset a
selected agent. LEDs on the agent will light up sequentially as
it executes the initialization test.
Reverting Configuration to Factory Settings
Use the Factory Settings command from the System menu to
change all configuration settings back to the factory defaults.
