A SERVICE OF

logo

385
Chapter 4, Description of Fields
Fields
Serial_9 In
This field selects the destination of characters received by the Test Set on the
serial port.
IBASIC is used to allow the IBASIC controller to read the serial port while a program is
running.
Inst configures the serial port to connect to an external ASCII terminal or computer to
enter IBASIC programs, or to control the Test Set using an external keyboard.
Operating Considerations
If a serial printer is connected, the PRINT command causes the printer to take
control of the serial port until printing is done.
This setting is maintained after the instrument is turned off.
Screens Where Field is Present
I/O CONFIGURE
Serial No.
This field displays the serial number of the Test Set.
Screens Where Field is Present
CONFIGURE