2
UHF/VHF
IN (ANT)
OUT (TV)
OUT
VIDEO
L
R
AUDIO
2
Connecting Antenna (or CATV)-VCR-TV
Important
Connect the AC cord to the AC outlet after all of the connections are complete.
2 Connect the supplied antenna
cable to the UHF/VHF OUT TO
TV connector on the VCR and
the antenna connector on the
TV.
1 Connect the TV antenna
cable (not supplied) to the
VCR.
AC outlet
Antenna connector
TV
3 If your TV has audio/video
input jacks, connect the VCR
and TV using the supplied
audio/video cables.
Basic connections
4 Connect the AC cord to
the AC outlet.
When the TV is connected to the UHF/VHF OUT (TV) connector using an antenna cable
Set the channel selector to 3CH or 4CH, not employed for broadcasts, and select the same channel on the TV.
Audio/video
input jacks
To select a desired TV channel on the TV
Turn the TV and VCR on, and press TV/VCR to turn off
VCR in the display window, or turn off this VCR.
OUT
VIDEO
L
R
AUDIO
3CH
4CH
