- www.americandj.com - XP-3™ Instruction Manual Page 10
- www.americandj.com - XP-3™ Instruction Manual Page 9
XP-3™ Controls and Functions
This is a fully focusing high quality lens. Focus the lens by manually
turning the lens in a clockwise or counter-clockwise direction until the
This jack is used to transmit the incoming DMX signal to another DMX
xture, or transmit a Master/Slave signal to the nest XP-3™ in the
chain. For best results in DMX or Master/Slave mode, terminate this
jack if it is the last unit in the chain. See
“Terminator” on page 7. “Terminator”
This jack is used to accept an incoming DMX signal (from a universal
DMX controller) or Master/Slave (from the output jack of another
This jack is for use with the optional
MINI/C Blackout controller only.
See page 7 for details on the MINI/C controller.
nect an audio signal this jack, this will damage the PC board and void
your manufactures warranty!
The power connection uses an I.E.C. type connector, use only a power
cord that matches this type of connection. Be sure to only connect
this unit to a power outlet that matches the printed power label on the
unit. Never use a power when the ground prong has been removed or
broken off. The ground prong is used to reduce the risk of electrical
shock in case of an electrical short. .
This housing stores the 5 amp GMA protective fuse. Always
replace with the exact same type fuse, unless other
an authorized American DJ
Lamp Socket Cover Thumb Screw -
This thumb screw holds the lamp socket assembly cover (16) into
This thumb screw holds the lamp socket cover (16) into place.
XP-3™ Controls and Functions