
Chapter 1 Getting Started 11
You can write information from your ISP or network administrator on these pages, then
enter it in Setup Assistant.
To set up a telephone dial-up connection, gather the following information:
 Service provider name
 User or account name
 Password
 ISP phone number
 Alternate phone number
 Dialing prefix to obtain an outside line
To set up a DSL, cable modem, LAN, or AirPort Extreme wireless connection:
m First, choose your connection method (ask your system administrator or your ISP,
if you don’t know):
 Manually
 Using DHCP with a manual address
 Using DHCP
 Using BootP
 PPP
If you’re unsure which method to use, “Using DHCP” may be a good choice, because
the network supplies most of the required information for you automatically.
If you selected “Manually” or “Using DHCP with a manual address,” gather the following:
 IP address
 Subnet mask
 Router address
Note: If you selected “Using DHCP with a manual address,” you don’t need a subnet
mask or router address.
If you selected “Using DHCP,” gather the following optional information (ask your ISP if
you need it):
 DHCP client ID
 DNS servers
If you selected “PPP” (for PPPoE connections), gather the following:
 Service provider
 Account name
 Password
 PPPoE service name
LL3140.book Page 11 Thursday, February 17, 2005 4:27 PM