Setting up the sewing computer 9
Attaching the accessory box to the
sewing computer
•
close the doors
•
push feet back into position
•
attach the box to the sewing computer
(catch A must engage); inserting
the presser foot lifter into the opening H
Note: first lower the presser foot lifter!
Removing the accessory box
•
press catch A on the top of the box
•
remove box to the rear
Free standing accessory box
•
pull both feet out until they click into
place
•
stand box in chosen position
Storing accessories
Standard accessories are supplied in a
plastic bag.
The box is equipped with one small and
one large drawer (B and C) as well as com-
partments for bobbin holders D and presser
feet E. (Additional compartments and
drawers are available as optional extras.)
•
push the bobbins into the compartments
provided
•
to remove a bobbin, press the compart-
ment holder F lightly
•
insert the presser foot shaft into the
slot E
•
the snap-on soles can be stored in the big
drawer C
•
the needle selection box can be stored in
compartment G
Accessory box**
** available as a special accessory
A
C
F
B
D
E
H
G
activa 125 (GB) 4.12.2002 14:16 Uhr Seite 9
030595.50.04_0201_a125_EN
