A SERVICE OF

logo

Assembly
Step 1: Assemble the Base
Parts
• BasePlatform(#19)
• RightFrameRail(#20)
• LeftFrameRail(#21)
• RearCrossBar(#22)
• CentralSupport(#23)
Hardware
• (4)3/8”x3/4”HexHeadBolts(#1)
• (4)3/8”x23/4”HexHeadBolts(#16)
• (12)3/8”Washers(#5)
• (4)3/8”NylockNuts(#7)
Tools
AdjustableWrench(notincluded)
1-1 Put the Base Assembly parts on the floor.
1-2 Align the bolt holes on the Right and Left Frame Rails with the holes in the Base Platform, Rear Cross Bar and the
Central Support.
1-3 Install the hardware, but do not tighten the bolts.
1-4 Tighten all hardware.
20
21
22
19
5
16
23
1
7
Assembly Manual
6