STEP 2 Creating and printing a label without using your computer
26
You can easily customize many functions of your machine, for example you can edit the
contents of the built in templates.
By editing a selected template, it is possible to change the label to your own format.
The editable content varies depending on the selected template.
The following explains an example when selecting template "[P07]Msg+D+T".
1
Press the up or down arrow button ( / ) until [P07] is shown on
the display, then press the OK button twice.
Press the Menu button in the Time
Display mode.
Menu Selection mode is displayed.
2
Select "Menu 1/12" by pressing the up or
down arrow button ( / ) and then
press the OK button.
Message selection mode is displayed.
3
Select the message by pressing the up
or down arrow button ( / ) and then
press the OK button.
The message is selected, and then the date
format selection mode is displayed.
Type of message
•
Received • Inspected • Approved
• Delivered By • Service Before • Best Before
• Expires • Date Installed • Next Test
• Completed • None
You can also upload new messages from your computer.
"None" can be selected only when using the template [P08].
4
Select the date format by pressing the
up or down arrow button ( / ) and
then press the OK button.
The date format is selected, and then the time
format selection mode is displayed.
Other convenient functions
2
Editing a template: Menu 1/12
12:34 [P07]
20/07/2010
Menu 1/12
Edit Template
Message [P07]
Received
Date [P07]
20/07/2010
