Installation
2-4
Table 2-1. Function of DIP Switch
Switch Function Description
8
Clear
Password
1
When toggled, this switch clears user-entered
passwords stored in NVRAM, and restores the
default passwords. Once the passwords are reset,
you can use the defaults or enter new passwords.
7
Clear
NVRAM
2
The module uses NVRAM to store user- entered
parameters such as IP addresses, device name, etc.
To reset these parameters to the factory defaults,
toggle this switch. Once reset, you can use the
defaults or enter new parameters, which are stored
in NVRAM when the module is powered down, and
remain there until the switch is toggled again.
6
Force BootP
Download
Toggling this switch, after pulling the board out of
the SmartSwitch 9000, clears download information
from NVRAM. It also forces image Þles to be
downloaded from the station connected to the EPIM
on the Environmental Module, which is conÞgured
to act as that moduleÕs B
OOT
P server.
5 Reserved For Factory Use Only
4 Reserved For Factory Use Only
3 Reserved For Factory Use Only
2 Reserved For Factory Use Only
1 Reserved For Factory Use Only
1
Do not toggle Switch 8 unless you intend to reset the user-entered passwords to
the factory default settings.
2
Do not toggle Switch 7 unless you intend to reset the user parameters to the
factory default settings.
!
CAUTION
