98 Video
NOTES
• If the degree of camcorder shake is too high, the image stabilizer may
not be able to fully compensate.
• [ Dynamic] is available only when [Zoom Type] is set to
[ Optical].
• For surveying and following shots, when you pan the camcorder from
side to side or tilt it up and down, we recommend setting the IS mode
to [Dynamic] or [Standard].
Pre-Recording
The camcorder will start recording 3 seconds before you press
Y, ensuring you do not miss important shooting opportuni-
ties. This is especially useful when it is difficult to predict when to start
recording.
Operating modes:
1 Activate the pre-recording function.
• z will appear on the screen.
• Repeat, selecting [OFF], to turn off pre-recording.
2Press Y.
The scene recorded in the memory will start 3 seconds before
Y was pressed.
[FUNC.] > [z Pre REC] > [ON] > [X]
