25
Using a MultiMediaCard
Your CASSIOPEIA supports MultiMediaCards.
Important
• The card slot cover will not close when certain types of cards are in the slot.
• Gently but firmly slide the card into place as far as it will go, but do not force it.
Forcing a card can damage connectors. If you have problems inserting a card, pull it
out and check to make sure it is oriented correctly.
• We strongly recommend that you store all unsaved data you are inputting or editing
before performing this procedure.
• Sometimes, your CASSIOPEIA may not be able to detect a MultiMediaCard. This is
indicated when a program on the card does not start up normally. When this happens,
remove the card, reinsert it, and then press the RESET button.
1.Make sure your CASSIOPEIA is turned off.
• Press the [Power] button to turn off power.
2.Open the cover.
• Slide the card lock switch to the FREE position.
3.If there is already a card in the slot, press in on the card and then remove it.
4.Slide the card you want to use into the card slot.
• Make sure the top of the card is facing towards the top of the CASSIOPEIA unit. A
card that is not oriented correctly will not slide all the way into the slot.
Carefully slide the card into the slot as far as it will go.
• Slide the card lock switch away from the FREE position to lock the card into place.
5.Close the card slot cover.
Bottom
Top
