Minisphere™ User Manual (Rev. 1) Page 9 of 15
4. OPERATION
To access the control panel functions, use the four buttons located underneath the
display.
Button Function
<MENU> Selects an operation mode or to backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
DMX Mode 512 d 1–d512 Selects the DMX starting address
Auto Programs P-- P1–P9 Selects automatic program
Auto Program
Speed
S-- S 1–S100 Sets automatic-program speed
Sound-Active SNd Starts sound-activated programs
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you
choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The Minisphere™ 3.1 uses up to 6 DMX channels in its single
the highest configurable address to 507.
If unfamiliar with DMX or DIP switches,
download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 512 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address (d 1–d512).
4. Press <ENTER>.
